Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
20
Avaya P330-ML Reference Guide
copy scp module-config
User level: supervisor
Use the copy scp module-config command to download a module
configuration to the device via SCP.
L Only parameters that differ from the factory default settings for the switch are
Use the copy scp module-config command to download a module
configuration to the device via SCP.
L Only parameters that differ from the factory default settings for the switch are
included in the configuration file. Therefore, it is important to reinitialize the
NVRAM to the factory default settings before downloading configuration files
to the switch. To reinitialize the NVRAM, run the nvram initialize
command.
NVRAM to the factory default settings before downloading configuration files
to the switch. To reinitialize the NVRAM, run the nvram initialize
command.
The syntax for this command is:
copy scp module-config
<filename> <ip>
Example (for Windows):
filename
Source file name on the SCP server (full path).
ip
The ip address of the SCP server.
P330-N# copy scp module-config c:\P330-ML\module.cfg 149.49.100.41
Username: 330user
Password:
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show download status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************