Avaya P330-ML-ML Manuel D’Utilisation

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

Avaya P330-ML Reference Guide

29

The syntax for this command is:

copy tftp stack-config <filename> <ip>

Example (for Windows):

Example (for Unix):

User level: supervisor
L This command applies to the P334T-ML only when it is in “Layer2” 

 device mode.

Use the copy tftp startup-config command to download a startup 
configuration from the saved TFTP file to the Startup Configuration file in the 
NVRAM.
L Only parameters that differ from the factory default settings for the switch are 

included in the configuration file. Therefore, it is important to reinitialize the 
NVRAM to the factory default settings before downloading configuration files 
to the switch. To reinitialize the NVRAM, run the nvram initialize 
command.

The syntax for this command is:

copy tftp startup-config <filename> <ip>

Example (for Windows):

filename

The file name (full path)

ip

The IP address of the TFTP server

Router-N# copy tftp stack-config c:\config\switch1.cfg 

Router-N# copy tftp stack-config /folder/switch1.cfg 

filename

Destination file name in the tftp server (full path)

ip

The ip address of the tftp server.

Router-N (super) # copy tftp startup-config c:\P330-