Avaya P330-ML-ML Manuel D’Utilisation

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

Avaya P330-ML Reference Guide

53

The syntax for this command is:

ping [host[number]]

Example: to ping the IP address 149.49.48.1 three times:

User level: supervisor
Use the prompt-length command to specify the length of the default CLI 
prompt.

The syntax for this command is:

prompt-length <full|<prompt-size>>

Example:

host

Host IP address/Internet address of route destination. If missing, 
then the host IP address specified in the last ping command is used.

number

Number of packets to send. If missing, then the number specified in 
the last ping command is used. If the last number is not available, the 
default is 4.

P330-N>ping 149.49.48.1 3

PING 149.49.48.1: 56 data bytes

64 bytes from 149.49.48.1: icmp_seq=0. time=0. ms

64 bytes from 149.49.48.1: icmp_seq=1. time=0. ms

64 bytes from 149.49.48.1: icmp_seq=2. time=0. ms

----149.49.48.1 PING Statistics----

3 packets transmitted, 3 packets received, 0% packet loss

round-trip (ms)  min/avg/max = 0/0/0

full

Display the full length of the prompt

prompt-
size

Set the length in characters of the prompt to display

P330-ML-1(super)# prompt-length 4

~r)#