Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide
85
The syntax for this command is:
set port channel [<port_list>] [<value>] [<name>]
L If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
Example:
set port classification
User level: privileged, supervisor.
Use the set port classification command to set the port classification to
either regular or valuable. Any change in the Spanning Tree state from Forwarding
for a valuable port will erase all learnt MAC addresses in the stack.
Use the set port classification command to set the port classification to
either regular or valuable. Any change in the Spanning Tree state from Forwarding
for a valuable port will erase all learnt MAC addresses in the stack.
The syntax for this command is:
set port classification [module/port] {regular|valuable}
Example:
set port disable
User level: privileged, supervisor.
Use the set port disable command to disable a port or range of ports.
Use the set port disable command to disable a port or range of ports.
port_list
A list of ports to be aggregated in the format module/port
value
on or off – enables or disables the channel for the specified
module ports
module ports
name
Channel name
P330-N# set port channel 1/5-6,8 on my-channel
Port 1/5 channel mode set to on 1/102
Port 1/6 was added to channel 1/102
Port 1/8 was added to channel 1/102
module port
module/port range
regular | valuable
port classification
P330-N# set port classification 2/19 valuable
Port 2/19 classification has been changed.