Avaya 882 Manuel D’Utilisation
25-14
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 25
Examples
Setting a Physical Port to Ignore Tag Priority
CLI Command
Use the set port ignore-tag priority command to set a port to ignore any
layer 2 tag priority (including 802.1p tags). The syntax of the command is:
layer 2 tag priority (including 802.1p tags). The syntax of the command is:
(configure)#
set port ignore-tag-priority {{<mod-num> | <mod-
swport-range>} [..., {<mod-num> | <mod-swport-range>}] | all-ports} {on
| off}
| off}
all-ports
All ports in the chassis. If you specify all-
ports, all ports on all modules in the chassis
are set with the same priority.
ports, all ports on all modules in the chassis
are set with the same priority.
<priority>
The priority that you want to assign to the port
or port range. Enter a number between 0 and
7. The highest priority is 7. Each physical port
has a default priority of 3.
or port range. Enter a number between 0 and
7. The highest priority is 7. Each physical port
has a default priority of 3.
Table 25-4. Keywords, Arguments, and Options
Keyword, Argument or
Option
Option
Definition
2 of 2
Table 25-5. Examples: set port default-priority
To...
Enter...
Set the port priority to 0 for all ports
on the module in slot 3
on the module in slot 3
set port default-priority 3 0
Set the port priority to 5 for ports 1
through 5 on the module in slot 3
through 5 on the module in slot 3
set port default-priority 3/1-5 5
Set the port priority to 2 for ports 1
through 5 on the module in slot 3 and
for port 1 on the module in slot 6
through 5 on the module in slot 3 and
for port 1 on the module in slot 6
set port default-priority 3/1-5,6/1 2