Avaya 882 Manuel D’Utilisation
Document No. 10-300077, Issue 2
25-21
80-Series QoS
Assigning a Priority to a DSCP
CLI Command
Use the set diffserv priority command to assign a priority to a DiffServ
code point (DSCP) in the DiffServ Mapping Table. The syntax of the
command is:
code point (DSCP) in the DiffServ Mapping Table. The syntax of the
command is:
(configure)#
set diffserv priority <priority> dscp <dscp-start-
range> [<dscp-end-range>]
Example
To assign a priority of 7 to DSCPs 15 through 63, enter:
set diffserv priority 7 dscp 15 63
Displaying the DiffServ Table
CLI Command
Use the show diffserv table command to display the priority that is
assigned to each DSCP.
assigned to each DSCP.
The syntax of the command is:
>
show diffserv table
* Note: The show diffserv table CLI command displays the packet loss
probability (PLP) for each DSCP. However, the switch does not
currently support PLP.
currently support PLP.
Table 25-12. Keywords, Arguments, and Options
Keyword, Argument or
Option
Option
Definition
<priority>
The priority that you want to assign. Enter a
number between 0 and 7.
number between 0 and 7.
<dscp-start-range>
The first DSCP in the range of DSCPs that
you want to assign the priority to. DSCPs
range from 0 to 63.
you want to assign the priority to. DSCPs
range from 0 to 63.
[<dscp-end-range>]
The last DSCP in the range of DSCPs that you
want to assign the priority to. DSCPs range
from 0 to 63.
want to assign the priority to. DSCPs range
from 0 to 63.