Belkin F1DN104D Fascicule

Belkin OmniView

Secure DVI KVM Switch User Manual Common Criteria Supplement

1.3 Usage Assumptions

The Common Criteria Evaluated Configuration requires the following assumptions in usage of the OmniView Secure
DVI Dual-Link KVM device. These assumptions should be assured either through facility or procedural provisions.

A. ACCESS

An AUTHORIZED USER possesses the necessary privileges to access the information

transferred by the TOE.

USERS are AUTHORIZED USERS.

A. EMISSION

The TOE meets the appropriate national requirements (in the country where used) for

conducted/radiated electromagnetic emissions. [In the United States, Part 15 of the FCC Rules

for Class B digital devices.]

A. ISOLATE

Only the selected COMPUTER’S video channel will be visible on the shared MONITOR.

A. MANAGE

The TOE is installed and managed in accordance with the manufacturer’s directions.

A. NOEVIL

The AUTHORIZED USER is non-hostile and follows all usage guidance.

A. PHYSICAL

The TOE is physically secure.

A. SCENARIO

Vulnerabilities associated with attached DEVICES (SHARED PERIPHERALS or

SWITCHED COMPUTERS), or their CONNECTION to the TOE, are a concern of the

application scenario and not of the TOE.

Common Criteria Administrative Guidance - OmniView

Secure DVI Dual-Link KVM Switch User Manual

F1DN102D F1DN104D
The follow section lists the supplemental information relating to a Common Criteria deployment for the
OmniView

Secure KVM Switch User Manual in accordance with AGD_OPE.1 Common Criteria Assurance

Measure requirements.

2.1 Usage Assumptions

Note that the usage assumptions listed in Section 1.4 must be maintained to assure all TOE security objectives are
maintained during usage.

2.2 Applicability of the OmniView

Secure DVI Dual-Link KVM Switch User Manual to Common Criteria

The OmniView Secure KVM Switch User Manual applies in its entirety to the Common Criteria
Evaluated Configuration.

OmniView

Secure KVM Switch