Microsoft ES4649 Manuel D’Utilisation
Command Line Interface
4-308
4
PIM-DM Multicast Routing Commands
router pim
This command enables Protocol-Independent Multicast - Dense Mode (PIM-DM)
globally for the router and to enter router configuration mode. Use the no form to
disable PIM-DM multicast routing.
globally for the router and to enter router configuration mode. Use the no form to
disable PIM-DM multicast routing.
Syntax
[no] router pim
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
This command enables PIM-DM globally for the router. You also need to
enable PIM-DM for each interface that will support multicast routing using the
ip pim dense-mode command (page 4-309), and make any changes
necessary to the multicast protocol parameters.
enable PIM-DM for each interface that will support multicast routing using the
ip pim dense-mode command (page 4-309), and make any changes
necessary to the multicast protocol parameters.
Example
Table 4-109 PIM-DM Multicast Routing Commands
Command
Function
Mode
Page
router pim
Enables PIM globally for the router
GC
ip pim dense-mode
Enables PIM on the specified interface
IC
ip pim hello-interval
Sets the interval between sending PIM hello messages
IC
ip pim hello-holdtime
Sets the time to wait for hello messages from a neighboring
PIM router before declaring it dead
IC
ip pim trigger-hello-interval
Sets the maximum time before sending a triggered PIM
Hello message
IC
ip pim join-prune-holdtime
Configures the hold time for the prune state
IC
ip pim graft-retry-interval
Configures the time to wait for a Graft acknowledgement
before resending a Graft message
IC
ip pim max-graft-retries
Configures the maximum number of times to resend a Graft
message if it has not been acknowledged
IC
show router pim
Displays the global PIM configuration settings
NE, PE
show ip pim interface
Displays information about interfaces configured for PIM
NE, PE
show ip pim neighbor
Displays information about PIM neighbors
NE, PE
Console(config)#router pim
Console#show router pim
Admin Status: Enabled
Console#
Console#show router pim
Admin Status: Enabled
Console#