Motorola P880 Manuel D’Utilisation

1 - 20

Cajun P880 Routing Switch Installation Guide

To install the rear fan assembly:

1. Loosen the four captive screws securing the lower panel on the

rear of the chassis.

2. Grasp the two top screws on the panel and pull towards you

(Figure 11).

3. Remove the fan tray from the chassis.

4. Insert the new fan tray into the chassis (fans facing up) and slide

it into place.

5. Make sure that the fan tray is seated firmly and tighten the

captive screws.

Figure 11. Installing Rear Fan Assemblies

Captive
Screws