Acer R720 Series Manuel D’Utilisation
67
To install the PCI riser assembly:
1
Observe the ESD precautions and pre-installation instructions
described on page 35.
described on page 35.
2
Lower the PCI riser assembly (A), aligning the three hooks on the
back edge of the riser assembly with the matching slots on the rear
of the chassis (B).
back edge of the riser assembly with the matching slots on the rear
of the chassis (B).
3
Press down on the assembly until the three hooks on the rear of
the riser assembly engage the chassis back panel slots.
the riser assembly engage the chassis back panel slots.
4
Connect the cables to the installed PCI card.
5
Observe the post-installation instructions described on page 36.
Removing and installing the PCI riser board
The PCI riser assembly has two PCI riser boards that supports five PCI
cards.
cards.
•
Low profile riser board- two PCI Express x8 slots (with x4
throughput)
throughput)
•
Full height riser board- two PCI Express x8 slots (with x4
throughput) and one PCI-X 133 MHz slot
throughput) and one PCI-X 133 MHz slot
PCI riser boards can be replaced if it fails or if you require a different
option.
option.