Alloy Computer Products NS-16T01FS Manuel D’Utilisation

 

This Switch is an unmanaged, but “smart” Switch because 
programmable administration parameters make it operate more 
effectively than regular unmanaged (dumb) switches. This 
chapter describes how to configure the Switch.  

Console Port (RS-232 DCE) 

The console configuration requires connecting a terminal, such as 
a Workstation or a PC running a terminal emulation program 
(such as HyperTerminal, which is automatically installed with 
Microsoft Windows) to the RS-232 DCE console port of the 
Switch.  
The console port is set at the factory for the following 
configuration:   
„

 

Baud rate: 

 

9,600 

„

 

Data width: 

 

8 bits 

„

 

Parity:  none 

„

 

Stop bits: 

 

1 

„

 

Flow control:   

None 

Make sure the terminal or PC you are using to make this 
connection is configured to match these settings.

 

For example, run the Hyperterminal program packaged with 
Windows 98/ME/2000/XP, the process will procede as follow:  

Step 1. Click Start 

Accessories    Communications Hyper 

Terminal (Figure 6), and then the Connection Description 
screen will be shown as Figure 7.