Alloy Computer Products NS-16T01FS Manuel D’Utilisation
23
High and Low. The default setting for QoS on all ports is High.
To change the QoS setting, highlight Port and enter the port
number to select the desired port. Set QoS as required to
determine which ports will always transfer their data first.
To change the QoS setting, highlight Port and enter the port
number to select the desired port. Set QoS as required to
determine which ports will always transfer their data first.
(4) Link Status
This value is automatically determined by the Switch and can’t
be changed. If there is a valid connection to the Switch through
the indicated port, the Link Status will show the connection speed.
The status will be Down if there is no connection through that
port.
be changed. If there is a valid connection to the Switch through
the indicated port, the Link Status will show the connection speed.
The status will be Down if there is no connection through that
port.
¾
VLAN (Virtual Local Area Network)
Grouping of individual ports into a small “virtual” network of
their own being independent of all other ports. To change the
VLAN, locate the port that needs to be set, select “V” for joining
the VLAN group and “-” for not joining. The default setting of
VLAN is shown as Figure 14.
their own being independent of all other ports. To change the
VLAN, locate the port that needs to be set, select “V” for joining
the VLAN group and “-” for not joining. The default setting of
VLAN is shown as Figure 14.
Figure 14. VLAN Configuration