ALTINEX MX2226AT Manuel D’Utilisation

Please read this manual carefully before using your
MX2226AT  Switcher. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your MX2226AT  and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.

•

  Unauthorized personnel shall not open the unit

since there are high-voltage components
inside.

•

  Qualified ALTINEX service personnel, or their

authorized representatives must perform all
service.

•

  Maximum operating ambient temperature is 35

(degrees C).

•

  Never restrict the airflow through the device’s

fan or vents.

•

  When installing equipment into a rack,

distribute the units evenly. Otherwise,
hazardous conditions may be created by an
uneven weight distribution.

•

  Connect the unit to a properly rated supply

circuit.

•

 Reliable Earthing (Grounding) of Rack-

Mounted Equipment should be maintained.

•

  For best results, place the MX2226AT

Switcher on a flat, level surface in a dry area
away from dust and moisture.

•

  To prevent fire or shock, do not expose this

unit to rain or moisture. Do not place the
MX2226AT  Switcher in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight, smoke,
or steam can harm internal components.

•

  Dropping or jarring can damage internal

components, so handle the MX2226AT
Switcher carefully.

•

  Do not place heavy objects on top of the

MX2226AT. If the MX2226AT  is to be
mounted to a table or wall, use only ALTINEX
made  DA1292FC 1U High Rack Mount and
cables for optimum setup.

•

  To turn off the main power, be sure to remove

the cord from the power outlet. The power
outlet socket should be installed as near to the
equipment as possible, and should be easily
accessible.

•

  Do not pull the power cord or any cable that is

attached to the MX2226AT Switcher.

•

 If 

the 

MX2226AT  Switcher is not used for an

extended period, disconnect the power cord
from the power outlet.

•

 Unplug the MX2226AT  power cord before

cleaning. Clean surfaces with a dry cloth.
Never use strong detergents or solvents, such
as alcohol or thinner. Do not use a wet cloth or
water to clean the unit.

•

  This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

•

  This equipment has been tested and found to

comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.