ALTINEX MT105-111 Manuel D’Utilisation
MULTI-TASKER
3
3
PRECAUTIONS / SAFETY WARNINGS
1
Please read this manual carefully before using your
MT105-110/111. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your MT105-110/111 and to prevent
fire and shock hazard. Please read them carefully
and heed all warnings.
MT105-110/111. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your MT105-110/111 and to prevent
fire and shock hazard. Please read them carefully
and heed all warnings.
1.1 GENERAL
•
Qualified ALTINEX service personnel, or their
authorized representatives must perform all
service.
authorized representatives must perform all
service.
1.2 INSTALLATION
•
To prevent fire or shock, do not expose this
unit to rain or moisture. Do not place the
MT105-110/111
unit to rain or moisture. Do not place the
MT105-110/111
in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight, smoke,
or steam can harm internal components.
any liquid. Exposure to direct sunlight, smoke,
or steam can harm internal components.
•
Handle the MT105-110/111
carefully.
Dropping or jarring can damage the card.
•
Do not pull the cables that are attached to the
MT105-110/111.
MT105-110/111.
•
Insert the card carefully into the slots of the
Multi-Tasker™ without bending any edges.
Multi-Tasker™ without bending any edges.
1.3 CLEANING
•
Clean only the connector area with a dry
cloth. Never use strong detergents or
solvents, such as alcohol or thinner. Do not
use a wet cloth or water to clean the card. Do
not clean or touch any component or PCB.
cloth. Never use strong detergents or
solvents, such as alcohol or thinner. Do not
use a wet cloth or water to clean the card. Do
not clean or touch any component or PCB.
1.4 FCC / CE NOTICE
•
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at his own expense.
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at his own expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.
expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.