ALTINEX MT110-100/102 Manuel D’Utilisation
MULTITASKER™
400-0132-005
23
Example:
In order to display the RS-232 commands
available for the MT110-102 card in slot 2, send
the command [HELPC2]. The commands along
with a brief description will be displayed in the
terminal window.
available for the MT110-102 card in slot 2, send
the command [HELPC2]. The commands along
with a brief description will be displayed in the
terminal window.
7.3. SUMMARY OF COMMANDS
Card Commands
1)
[VER]
Receives software version
2)
[C]
Receives status of the card
3)
[CnS]
Save card settings
4)
[?]
Show system cards
5)
[?C]
Show card information
6)
[STA1]
Enable auto feedback
7)
[STA0]
Disable auto feedback
8)
[ON]
Turn on one or more outputs
9)
[OFF]
Turn off one or more outputs
10) […S]
Save the command being sent
11) […F]
Show command feedback
12) […P]
Sets the path, preload for [SW]
13) [SW]
Switch preloaded output buffer
14) [IO]
Connect an input to output
15) [IO*]
Connect an input to all outputs
16) [CLR]
Reset card to default values
17) [OSI]
Set input offset
18) [OSO]
Set output offset
19) [FBD]
Feedback delay on/off
ID Commands
20) [RSI]
Reset Card IDs
21) [SIDn]
Set all Card IDs
22) [SIDnCi]
Set one Card ID
23) [SID+]
Set Card ID offset
24) [RSN]
Read Card slot number
Group Commands
25) [WR]
Groups multiple cards
26) [RMC] Remove members from group
27) [RMG] Delete group
28) [RD]
Displays group members
Volume/Matrix Commands
29) [TEST]
Test internal memory ICs
30) [VLO]
Set absolute output volume
31) [SEL]
Select input volume to adjust
32) [ + ]
Increment volume
33) [ - ]
Decrement volume
34) [RUP]
Ramp UP to max (32)
35) [RDN]
Ramp DOWN to min (0)
36) [RUPm]
Ramp volume UP to max (32)
37) [RUPm=] Ramp volume UP to a value
38) [RDNm]
Ramp volume DOWN to min (0)
39) [RDNm=] Ramp volume DOWN to a value
40) [RST]
Stop ramping
41) [RAMP]
Display ramp rate
42) [RAMP=] Set ramp rate
43) [MUT0]
Output Volume ON
44) [MUT1]
Output Volume OFF
45) [MAT]
Matrix Configuration
46) [HELP]
Display available commands