Fujitsu ST4000 Manuel D’Utilisation
41
A g e n c y N o t i c e s
UL Notice
This unit requires an AC adapter to operate. Use only UL
Listed Class 2 Adapters with an output rating of 16 VDC,
with a current of 3.75 A.
Listed Class 2 Adapters with an output rating of 16 VDC,
with a current of 3.75 A.
AC Adapter output polarity:
For Authorized Repair Technicians Only
System Disposal
In the event of system disposal, please observe the
following information regarding proper procedures in
In the event of system disposal, please observe the
following information regarding proper procedures in
the State of Vermont.
C A U T I O N
The modem-to-telephone network connection must be
a line cord using a minimum #26 AWG wire.
a line cord using a minimum #26 AWG wire.
W A R N I N G S
■
For continued protection against risk of fire, replace
only with the same type and rating fuse.
only with the same type and rating fuse.
■
Danger of explosion if Lithium (clock) battery is incor-
rectly replaced. Replace only with the same or equiva-
lent type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer’s
instructi
rectly replaced. Replace only with the same or equiva-
lent type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer’s
instructi
on.
The liquid crystal display (LCD) lamps used in this
system contain mercury. In the event of system
disposal, be sure to follow local guidelines.
system contain mercury. In the event of system
disposal, be sure to follow local guidelines.
+
The liquid crystal display (LCD) lamps used in this
system contain mercury. In the event of system
disposal, be sure to follow local guidelines.
system contain mercury. In the event of system
disposal, be sure to follow local guidelines.
Alb_UG_Active B.book Page 41 Monday, October 21, 2002 12:15 PM