SUPER MICRO Computer 2042G-6RF Manuel D’Utilisation

This manual is written for professional system integrators and PC technicians. It 

provides information for the installation and use of the A+ SERVER 2042G-TRF/6RF. 

Installation and maintenance should be performed by experienced technicians 

only.

The A+ SERVER 2042G-TRF/6RF is a high-end quad processor server based 

on the SC828TS+-R1400LPBP 2U rackmount server chassis and the Super 

H8QG6/i-F serverboard. The H8QG6/i-F supports four AMD 6000 processors. 

Please refer to our web site for an up-to-date list of supported processors.

The A+ SERVER 2042G-TRF contains an H8QGi-F serverboard without SAS2 

features while the A+ SERVER 2042G-6RF contains an H8QG6-F serverboard 

with SAS2 features.

The  fi rst chapter provides a checklist of the main components included with the 

server system and describes the main features of the Super H8QG6/i-F serverboard 

and the SC828TS+-R1400LPBP chassis.

This chapter describes the steps necessary to install the A+ SERVER 

2042G-TRF/6RF into a rack and check out the server confi guration prior to powering 

up the system. If your server was ordered without the processor and memory 

components, this chapter will refer you to the appropriate sections of the manual 

for their installation.

Refer to this chapter for details on the system interface, which includes the functions 

and information provided by the control panel on the chassis as well as other LEDs 

located throughout the system.

You should thoroughly familiarize yourself with this chapter for a general overview 

of safety precautions that should be followed when installing and servicing the A+ 

SERVER 2042G-TRF/6RF.

iii

Preface