Gateway 7450R Manuel D’Utilisation
Replacing and Adding Internal Devices
35
4
Unclip the heatsink by pressing down on the top of the clip, then pushing
the top of the clip toward the heatsink.
the top of the clip toward the heatsink.
5
Lift the heatsink off of the processor.
6
Remove the processor by pulling the lever arm slightly away from the
processor socket, then lifting it to a ninety-degree angle.
processor socket, then lifting it to a ninety-degree angle.
7
Lift the old processor out of the socket.
8
Insert the new processor by aligning pin one on the processor and the
socket, then place the processor into the socket.
socket, then place the processor into the socket.
Clip
Hook
1
2
2
1
Pin 1
8507328.book Page 35 Thursday, February 15, 2001 11:28 AM