Fujitsu RX900 S1 Manuel D’Utilisation
214
Maintenance Manual
RX900
S1
Processors
Ê
Fasten the heat sink with its five captive screws. Fasten the screws
alternately until they are fully tightened:
alternately until they are fully tightened:
–
Give each screw about 4 turns at a time.
–
Start with screw 1 to screw 5 as indicated in
and continue with
screw 1.
–
Torque: 0.6 Nm
10.2.8 Completing the task
Ê
Perform the following procedures to complete the task:
1.
2.
3.
4.
5. Enter the BIOS menu and enable the replaced processor.
6.