Fujitsu RX600 S6 Manuel D’Utilisation
118
Operating Manual
RX600
S6
CSS components
8.2.2.2
Installing a non-hot-plug expansion card
Figure 34: Inserting the new expansion card
Ê
Open the expansion card lock by lifting it up (1).
The expansion card is now mechanically unlocked.
Ê
Remove the slot cover (2).
V
CAUTION!
Keep the slot cover of the PCI slot. If you remove the controller again
and do not replace it with a new one, the slot cover must be
reinstalled to comply with EMC regulations and to satisfy cooling
requirements and fire protection measures.
and do not replace it with a new one, the slot cover must be
reinstalled to comply with EMC regulations and to satisfy cooling
requirements and fire protection measures.
Ê
Insert the new expansion card into the provided slot.
Ê
Close the expansion card lock by folding it down. Make sure that the
expansion card lock engages.
expansion card lock engages.
Ê
If necessary, connect the cables on the expansion card.
Ê
Close the server (see
).
/
0