Fujitsu TX300 Manuel D’Utilisation
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
TX300 S6
Options Guide
25
Safety instructions
I
You can prevent damage from the optical drive and the CDs/DVDs/BDs,
as well as premature wear of the disks, by observing the following
suggestions:
as well as premature wear of the disks, by observing the following
suggestions:
–
Only insert disks in the drive when needed and remove them after
use.
use.
–
Store the disks in suitable sleeves.
–
Protect the disks from exposure to heat and direct sunlight.
Laser information
The optical drive complies with IEC 60825-1 laser class 1.
V
CAUTION!
The optical drive contains a light-emitting diode (LED), which under
certain circumstances produces a laser beam stronger than laser
class 1. Looking directly at this beam is dangerous.
certain circumstances produces a laser beam stronger than laser
class 1. Looking directly at this beam is dangerous.
Never remove parts of the optical drive casing!
Modules with Electrostatic-Sensitive Devices
Modules with electrostatic-sensitive devices are identified by the following
sticker:
sticker:
Figure 1: ESD label
When you handle components fitted with ESDs, you must always observe the
following points:
following points:
●
Switch off the system and remove the power plugs from the power outlets
before installing or removing components with ESDs.
before installing or removing components with ESDs.
●
You must always discharge static build-up (e.g. by touching a grounded
object) before working with such components.
object) before working with such components.
●
Any devices or tools that are used must be free of electrostatic charge.