Fujitsu BX400 S1 Manuel D’Utilisation
BX400 S1
Operating Manual
23
2
Installation steps, overview
This chapter provides an overview of the installation steps for your BX400 S1
system unit. Links take you to sections where you can find more detailed
information about the respective steps:
system unit. Links take you to sections where you can find more detailed
information about the respective steps:
Ê
First read the
from
, particularly the
Ê
Unpack the system, check the delivery for damage sustained during
transport and make sure it corresponds to the specifications in the delivery
note (see section
transport and make sure it corresponds to the specifications in the delivery
note (see section
Ê
Set up the floorstand model (see section
) or install the rack model in the rack (see section
).
Ê
Connect the cables (see
Ê
Connect the system to the mains (see
Ê
Familiarize yourself with the control and display elements on the front and
back of the system unit (see chapter
back of the system unit (see chapter
starting on
).
Ê
Install the server blades and storage blades in the slots on the front of the
system unit (see section
system unit (see section
Ê
Install the connection blades in the slots on the back of the system unit (see
section
section
Ê
Configure the management blades (see section
) so that you
can carry out all further administration of the system unit via LAN.
Ê
Install the required operating systems and applications on the server blades.
For information see the relevant operating manuals.
For information see the relevant operating manuals.