Fujitsu RX200 Manuel D’Utilisation
26
Options Guide
Exchanging the processor
Processors
Ê
Apply a small amount of thermal paste to the top of the new processor.
Ê
Spread the paste thinly and evenly.
Ê
Fit the heat sink on the processor such that the side labeled “FRONT” is
facing the front of the server (see page 23).
facing the front of the server (see page 23).
Ê
Attach the heat sink with four screws. Tighten the screws in diagonally
opposite sequence (see page 23).
opposite sequence (see page 23).
Ê
Reinstall the ventilation duct (see page 20).
Ê
Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45.
described in the chapter “Completion” on page 45.