Fujitsu RX200 Manuel D’Utilisation
Options Guide
41
Controllers in Non-Hot-Plug PCI Slots
Installing controllers
Figure 23: Mounting the board
Ê
Plug the board into the PCI slot on the riser card that is suitable for the height
of the board.
of the board.
I
Make sure that the slot cover fits into the appropriate recess.
Ê
If necessary, plug in the cables on the board and other components.
Reinstalling the riser card holder
Ê
Plug the riser card holder into the system board.
Ê
Attach the riser card holder to the rear of the housing with two knurled
screws (see page 40).
screws (see page 40).
Ê
Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45f.
described in the chapter “Completion” on page 45f.
Low-profile slot (#2)