Lucent Technologies 555-233-115 Manuel D’Utilisation
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Troubleshooting an Upgrade
B-9
Troubleshooting Release 8 Upgrades
B
Troubleshooting Release 8 Upgrades
The subsections to follow present specific procedures for common upgrade
problems, listed below:
problems, listed below:
■
■
■
■
■
■
■
■
■
No Translations After Upgrade
This problem usually means that the save translation command, performed
during the upgrade, was not successful. To recover:
during the upgrade, was not successful. To recover:
1. Install the backup tape (removable media) into the tape (removable
media) drive. This tape (removable media) must contain the original
translations before the upgrade started.
translations before the upgrade started.
2. Verify that the software is Release 8 and that shadowing is up.
3. Copy the translations from the backup tape (removable media) to the disk.
Type copy translation disk both and press
Enter
. This copies the
translations from tape (removable media) to disk and takes about 30
minutes.
minutes.
4. Type reset system 3 and press
Enter
.
5. When the reboot is finished, the system should contain all of the
translations from the backup tape (removable media).