Lucent Technologies 555-233-115 Manuel D’Utilisation
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory
1-6
Upgrade the software and hardware
1
Upgrade the software and hardware
Check SPE
1. Type status spe and press
Enter
to check the health of the SPE.
For high or critical reliability systems:
■
The
Standby Refreshed
field shows yes
■
The
Standby Shadowing
field shows on
■
The
Standby Handshake
field shows up
Save Translations
1. Type save translation and press
Enter
to write all translation information
from memory to the disk, which takes about 2 minutes.
Save Announcements (if necessary)
NOTE:
The TN750C Announcement circuit pack stores announcements in
nonvolatile memory; saving the announcements is optional.
nonvolatile memory; saving the announcements is optional.
1. If the PPN contains a TN750/B Announcement circuit pack, type display
announcements and press
Enter
.
2. If administered recorded announcements are listed, type save
announcements
cabinet carrier slot and press
Enter
. For example,
01D03. This takes about 30 minutes.
NOTE:
For some software loads, type save announcements from
cabinet
carrier slot. Type help and press
Enter
for complete command
usage.
Back Up Disk
1. Type backup disk and press
Enter
to write all information from the disk to
the backup tape. This takes 30 to 40 minutes.