Polycom 1725-36028-001 Manuel D’Utilisation

Features Programming (no Softkeys) 

you change them, be sure to enter the corresponding changes in 
the 

 screen in the next section. 

FCN+1 

FCN+2 

 

FCN+3 

 

FCN+4 

 

FCN+5 

 

FCN+6 

 

FCN+7 

 

FCN+8 

 

FCN+9 

(Leave Blank) 

FCN+0 

 

FCN+* 

 

FCN+# 

 

Consult your wired telephone system documents for the key 
sequence that matches the feature in the above table. Blank cells 
are provided for your data. 
Note that the zero (0), star (*), and pound (#) keys are not 
assigned by default, but may be programmed here and in the 
default menus on the handsets. 

2.  Navigate to the function key, press Enter, and type the key 

sequence that corresponds to the feature you want to activate for 
that function. Press Enter after each entry. 

3.  Type F to assign the FLASH function. 

Example: If the Transfer feature key sequence is “Flash Star 7” and 
you wish to keep the default at 

+

, navigate to key 2, press 

Enter, type F*7 and press Enter. 

4.  Repeat for each feature you wish to program to a function key 

macro. 

Remember to note the features and macros so that they can be edited 
in the handset menu, if necessary, and programmed into any other 
SpectraLink 8000 Telephony Gateways on the same PBX if Send All is 
not being used. 
When you have finished programming the macros, press Esc to return 
to the 

menu. 

PN: 1725-36028-001_T.doc 

75