Patton electronic 2977 Manuel D’Utilisation

Model 2977 DialFire RAS User Guide

Driver installation for the Microsoft Windows NT operating system

The system asks you to specify a Frame Type. 

8. Choose 

 and then 

. 

The network bindings page appears. 

9. Choose 

 to accept the bindings and 

 again to start the network. 

10. Enter the name of your computer and workgroup and click 

. 

11. Restart your computer to activate Windows NT Networking. 

Use this procedure to configure a Patton Electronics adapter for the first time.

Procedure
1. Install the driver. See Installing the Driver: CD or Installing the Driver: Downloaded. 

2. Use the configuration wizard and online Help to guide you through initial configuration. 

Use this procedure to change the configuration of a previously-configured Patton Electronics adapter.

Procedure
1. Access the configuration utility by choosing 

. 

2. Choose the adapter from the list and then Properties. The adapter properties page appears. 

3. Select an item to reconfigure from the left-hand pane of the properties page and then choose 

. 

4. Change the configuration as required and then choose 

. 

Use this procedure to configure Patton Electronics devices as RAS ports (sometimes called RAS capable 
devices).

Procedure
1. If you need to access Windows NT RAS, choose 

. 

2. To add a modem port to the RAS configuration, do the following: 

– Choose 

. 

– Choose <Don't detect my modem; I will select it from a list> and then choose 

. 

– Choose 

 from the Manufacture's list and 

 from the 

Model's list and then choose 

. 

– Install this modem type on the ports you want to use for RAS and then follow the prompts until you get 

to the Add RAS Device dialog. 

– From the Add RAS Device dialog, choose devices to add to RAS and then OK. 

– Configure a RAS device by doing the following: 

o  Choose the device and then Configure.