Panasonic FP Manuel D’Utilisation
First Steps
FP Web-Server V2.11
34
3.3 Connection of the FP Web-Server
For an initial function test (without the PLC data), the FP Web-Server has to be connected to the
Ethernet and be supplied with operating voltage (24V DC and FG).
Ethernet and be supplied with operating voltage (24V DC and FG).
In the second step, the FP Web-Server has to be connected to the PLC (via RS232C). The
RS232C setting of the PLC must correspond to that of the FP Web-Server. This setting can be
defined in the PLC program (FPWIN Pro) under the system parameter settings.
RS232C setting of the PLC must correspond to that of the FP Web-Server. This setting can be
defined in the PLC program (FPWIN Pro) under the system parameter settings.
Please remember the ID number found on the FP Web-Server's type label. You
will need it when you configure the Web-Server.
will need it when you configure the Web-Server.