Server Technology BL20P Manuel D’Utilisation
Operating and
Performance
Specifications for RJ-
45 Patch Panel
Performance
Specifications for RJ-
45 Patch Panel
Dimensions
Height
10.405 in (26.43 cm)
Width
1.535 in (3.899 cm)
Depth
27.697 in (70.35 cm)
Capability
IEEE 802.2, 802.3, 802.3u
Network Transfer Rate 10 Base-T (half-duplex)
10 Mbps
10 Base-T (full-duplex)
20 Mbps
100 Base-TX (half-
duplex)
duplex)
100 Mbps
100 Base-TX (full-
duplex)
duplex)
200 Mbps
1000 Base-TX (full-
duplex)
duplex)
1000 Mbps
Connector
RJ-45
Cable Support
10 Base-TX
Categories 3, 4, or 5 UTP (2 or 4 pair); up to
328 ft (100 m)
328 ft (100 m)
100 Base-TX
Category 5 UTP (2 pair); up to 328 ft (100 m)
1000 Base-TX
Category 5E (4 pair); up to 328 ft (100 m)
Power Requirements
200 mA at + 5V DC; 500 mA at -48V
Temperature Range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing)
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Wet Bulb Temperature Operating
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F per 1,000 ft (1° C per 304.8 m).
No direct sunlight. Upper operating limit is 10,000 ft or 70Kpa (3,048 m or 10.1 psia). Upper non-
operating limit is 30,000 ft or 30.3 KPa (9,144 m or 4.4 psia). Storage maximum humidity of 95%
is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
No direct sunlight. Upper operating limit is 10,000 ft or 70Kpa (3,048 m or 10.1 psia). Upper non-
operating limit is 30,000 ft or 30.3 KPa (9,144 m or 4.4 psia). Storage maximum humidity of 95%
is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and
Performance
Specifications for GbE2
Interconnect Switch
Performance
Specifications for GbE2
Interconnect Switch
Dimensions
Height
10.405 in (26.43 cm)
Width
1.535 in (3.899 cm)
Depth
27.697 in (70.35 cm)
Weight
12.0 lb/5.4 kg per interconnect switch
Performance
24 Gbps External port bandwidth per server blade enclosure (full
duplex)
duplex)
Forwarding rate 1.5 million pps per gigabit port (64-byte packets)
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex
support
support
Forwarding Mode
Store and forward
MAC Addresses
2,048 per interconnect switch
Forwarding table age
time
time
Maximum age: 1 to 65535 seconds; default: 300 seconds
Memory
128MB Main, 32MB flash and 2MB packet buffer per interconnect
switch
switch
Compliance
IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE2 only), 802.1D,
802.3ac, 802.3ad (Static), and 802.1Q
802.3ac, 802.3ad (Static), and 802.1Q
QuickSpecs
HP ProLiant BL20p p-Class Server Blade
Technical Specifications
DA - 11411 Worldwide QuickSpecs — Version 24 — 9.24.2004
Page 28