Adtran MP-118 Manuel D’Utilisation
MP-11x & Microsoft Office Communications Server 2007
Quick Installation Guide
38
Document #: LTRT-26301
5 Monitoring
the
Gateway
The gateway provides several methods to monitor various operating statuses:
Monitoring the gateway's front-panel chassis LEDs (refer to Section
Monitoring the gateway's channels using the Embedded Web Server (refer to Section
page
5.1 Front-Panel
LEDs
The gateway provides various operating LEDs on its front-panel, as described in the table below:
Table 5-1: Description of Gateway's Front Panel LEDs
LED
Type
Color
State
Definition
Green
On
Device powered, self-test OK.
Orange
Blinking Software
loading/Initialization.
Ready
Device
Status
Red
On Malfunction.
Green
On
Valid 10/100 Base-TX Ethernet connection.
Uplink
Ethernet
Link Status
Red
On No
uplink.
Green
On
Power is currently being supplied to the gateway.
Power
Power
Supply
Status
--
Off
Either there’s a failure / disruption in the AC power
supply or power is currently not being supplied to the
gateway through the AC power supply entry.
supply or power is currently not being supplied to the
gateway through the AC power supply entry.
Red
On
Failure (fatal error) or system initialization.
Fail
Failure
Indication
--
Off No
traffic.
Green
On
The FXO gateway off-hooks the line towards the PBX.
Green
Blinking
Indicates an incoming call, before answering.
Red
On Line
malfunction.
Channels
Status
Telephone /
PBX
Interface
--
Off
Normal on hook position.
Note:
The front panels of the MP-114 and MP-118 are similar except for the number of
Channels
Channels
Status LEDs.