Toshiba Satellite R10 Manuel D’Utilisation

To execute the System Test select 1 from the DIAGNOSTIC TEST MENU, press Enter and 
follow the directions on the screen. Move the highlight bar to the subtest you want to execute and 
press Enter. 

Subtest 01 

ROM Checksum 

This subtest executes a checksum test of the BIOS ROM (range: F0000h to 
FFFFFh, 64KB) on the System Board. 

Subtest 02 

Fan ON/OFF 

This subtest turns on/off the fan motor by force with Fan ON/OFF commands. 

The following message will appear. 

Fan number select (1;FAN#1(CPU), 2;FAN#2(GPU), 0; FAN#1&#2)? 

To check the CPU fan, press 1 and Enter. 
To check the GPU fan, press 2 and Enter. 
To check both CPU fan and GPU fan, press 0 and Enter. 

The following message will appear.  

*** Test Fan Revolution 0000RPM start 

Make sure the fan does not rotate, then press Enter. 

The following message will appear.  

*** Test Fan Revolution Low speed Start 

Make sure the fan rotates at low speed, then press Enter. 

The following message will appear.  

*** Test Fan Revolution High speed Start 

Make sure the fan rotates at high speed, then press Enter. 

After a while, the fan rotating will stop.

 

Subtest 03 

Geyserville