Toshiba Satellite R10 Manuel D’Utilisation

Page de 384
4 Replacement Procedures 
4.24  Touch pad 
Satellite R10 Maintenance Manual (960 -509)  
 
4-51 
4.24  Touch pad 
Removing the touch pad 
The following describes the procedure for removing the touch pad. (See Figure 4-36.) 
1.   Remove the following  screws securing  the touch pad. 
M2.0x4.0B  
S-THIN FLAT BIND screw   
 
x3  
2.   Remove the touch pad holder and touch pad  from the cover assembly.  
3.   Peel off the glass tape and disconnect the touch pad cable  from the touch pad. 
 
 
Figure 4-36   Removing the touch pad 
Installing the touch pad 
The following describes the procedure for installing the touch pad (See Figure 4-5.). 
1.   Connect the touch pad cable  to the touch pad and stick the glass tape 
Install the touch pad and touch pad holder to  the cover assembly.  
Secure the touch pad with the following screws. 
M2.0x4.0B  
S-THIN FLAT BIND screw   
 
x3  
M2.0x4.0B S-THIN FLAT BIND 
Glass tape 
Touch pad cable  
Touch pad 
Touch pad holder