Manualsbrain.com
  1. Manuels
  2. Marques
  3. Toshiba
  4. Satellite R10
  5. Manuel D’Utilisation

Toshiba Satellite R10 Manuel D’Utilisation

Télécharger
Page de 384
4.29 LCD/digitizer harness & Wireless LAN antenna cables  4 Replacement Procedures  
4-64 
 
Satellite R10 Maintenance Manual  (960 -509)  
4.29  LCD/digitizer harness & Wireless LAN antenna cables 
Removing the LCD/digitizer harness & wireless LAN antenna cables 
The following describes the procedure for removing the LCD/digitizer harness & wireless 
LAN antenna cables. (See Figure 4-43 and 4-44.) 
1.   Pull out the wireless LAN antenna cables from the guide. 
2.   Remove the following  screws  and LCD harness holder. 
? 
M2.5x2.8B  
FLAT BIND screw 
 
 
 
 
x1  
3.   Remove the following  screws  and digitizer harness holder. 
? 
Unique screw CPU stud screw   
 
 
 
 
x1  
? 
M2.5x6.0S  
PSP TIGHT screw 
 
 
 
 
x1 
4.   Remove the following  screws  securing  the hinge assembly. 
? 
M2.5x6.0B  
FLAT BIND screw 
 
 
 
 
x1  
? 
M2.5x6.0S  
PSP TIGHT screw 
 
 
 
 
x1 
5.   Remove the hinge rear cover from  the hinge assembly. 
6.   Detach  the cover assembly from the display cover. 
 
Figure 4-43   Removing the cover assembly 
LCD harness holder 
M2.5x2.8B FLAT BIND 
M2.5x6.0B FLAT BIND 
M2.5x6.0S PSP TIGHT  
Digitizer harness holder 
Hinge rear cover 
CPU stud