APC AP8861 Manuel D’Utilisation

Administrator only

Enable or disable access to the FTP server. Optionally, change the port setting to the 

number of any unused port from 5001 to 32768 for added security.

 

To change the TCP/IP port to 5001, type:

ftp -p 5001

Administrator, Device User

View a list of all the CLI commands available to your account type. To view help text for 

a specific command, type the command followed by 

help

.

To view a list of commands available to someone logged on as a Device User, type:

help

 To view a list of options that are accepted by the 

alarmcount

 command, type:

alarmcount help

Administrator, Device User

View the status of the network and all active IPv4 and IPv6 addresses.

Administrator

View and configure the network time protocol parameters.

 

To enable the override of manual setting, type:

ntp -OM enable

 To specify the primary NTP server, type:

ntp -p 150.250.6.10

-p

<port number>

Define the TCP/IP port that the FTP server uses to communicate with the 
Rack PDU (21 by default). The FTP server uses both the specified port and 
the port one number lower than the specified port.

-S

enable | disable

Configure access to the FTP server. 

-OM

enable | disable

Override the manual settings.

-p

<primary NTP 
server>

Specify the primary server. 

-s

<secondary 
NTP server>

Specify the secondary server.