Fujitsu fi-6670A Mode D'Emploi
Chapter 9 Operational Settings
184
Setting Example 2 : Selected range = Enable,
Start = 0 mm, End =0 mm
Start = 0 mm, End =0 mm
A multifeed error will be detected only for the blue-shaded
area in the figure above.
area in the figure above.
Setting Example 3 (Bad Example): Selected range
= Enable, Start = 100 mm, End =102 mm
= Enable, Start = 100 mm, End =102 mm
Since the detection range (length) is less than the minimum
value (5 mm), the Multifeed Detection cannot be performed
correctly.
value (5 mm), the Multifeed Detection cannot be performed
correctly.
When [Check Overlapping(Ultrasonic)] is selected, the multi-
feed detection ratio may drop if the document sheet(s) are
glued or electrostatically adhered to each other.
feed detection ratio may drop if the document sheet(s) are
glued or electrostatically adhered to each other.
35
300
Feeding direction
Unit: mm
35
300
2
100
Feeding direction
Unit: mm