Fujitsu fi-5950 Manuel D’Utilisation

190

8.4 Multifeed Detection

Multifeed refers to the phenomenon, when two or more documents are fed overlapping at once into the 
scanner.
This may cause the loss of important data.
To prevent this, this scanner is equipped with a Multifeed detection function.
When function is activated, a message will be displayed and the scanning interrupted in case a Multifeed 
has been detected.
Configure the settings for the Multifeed detection as follows.

None

: No Multifeed detection will be performed.

Check Overlapping
(Ultrasonic)

: Document overlapping will be monitored.

When this method is slected, two more options are available specified by other sec-
tions.
 • Multifeed detection areas can be narrowed separately for left/middle/right Ultra-

sonic sensors to avoid unintensional multifeed detection of sticked photogragh or 
something on the document. To specify this, go to Step 4.

 •  If photogragh or something is sticked on the document and its size and/or position 

are same, you can easily let the scanner memorize its size and/or position just 
scanning those document. To use this function, go to Section 

 or Section 

Check Length:

: The difference of the documents length will be monitored.

Check Overlapping 
and Length

: [Check Overlapping] and [Check Length], both parameters will be used for monitor-

ing the fed documents.