Fujitsu 8.4 Manuel D’Utilisation

103

Product:

M3091DC (fi-4110C)

Type:

Desktop

Image sensor:

Reduced optical system

Operating method:

Automatic Document Feed (ADF), simultaneous double -sided
reading

Light source:

Fluorescent tube (White)

Basic resolution:

Horizontal scanning: 300 dpi
Vertical scanning: 600 dpi

Output resolution

50 dpi to 600 dpi (at steps of 1dpi)

Grayscale levels (internal):

8 bit 256 levels

Grayscale output:

Enabled (8 bits)

Halftone Patterns:

Dither matrix (can be downloaded), Error diffusion

Color (24bit) output:

Enabled

ADF scanning speed

B/W

Single sided: 15 pages per minute (200 dpi, A4, 55 kg)

Double sided: 7.5 pages per minute (200 dpi, A4, 55kg)

(=15 screens per minute)

Color

Single sided: 5 pages per minute (150 dpi, A4, 55 kg)

Double sided: 2.5 pages per minute (150 dpi, A4, 55kg)

(=5 screens per minute)

ADF chuter capacity:

Maximum 50 sheets (A4, ream weight: 55 kg, High quality paper,
normal temperature and humidity)

Document size:

Minimum 52mm

74 mm

Maximum 216 mm

356 mm

Supported regular paper

A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Visiting card

Scanning area specification: Specified (one location)

White level follower:

Disabled

Contrast setting:

256 steps

Gamma pattern:

Internal types are not available. (Cannot be downloaded)

At custom specification, entering a value enables to set a pattern.

Image processing function:

Automatic binary(floating slice system), De-Screen,
Edge emphasis, Reverse image

Interface:

SCSI-II

Change processing is done inside the driver.

This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.

. Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.

For other paper sizes, the customer settings can be used.