Fujitsu fi-4640S Manuel D’Utilisation

 7-5

<Screen 42>

1 Press 

 or 

 and let the scanner

display Screen 42.

2 Press either the 

 or 

 button to set double feed detection according to paper length.  The paper

length is checked using the difference between two consecutive sheets of paper fed from the ADF.

Each time either of these buttons is pressed, the location of the blinking moves. When the 

 button is

pressed, the blinking moves from (1) to (3). When the 

 button is pressed, the  blinking moves in the

opposite direction. However, if the setting by the host computer is valid, the location of the blinking
does not move when either button is pressed.
(1) “No” is blinking:

Paper length is not checked.

(2) “Yes” and “1” are blinking:

Paper length is checked.  However, a detected double feed error
is displayed only on the screen; processing is continued.

(3) “Yes” and “2: Stop” are blinking:

Paper length is checked.  When the double feed error is
detected, the scan processing is stopped.  The error is then
reported to the host.

If you want to disable the double feed, select “No” then press 

. Press 

 to return.

After pressing 

, the scanner displays the screen 42-1.

<Screen 42-1>

3 Press either the 

 or 

 button to set double

feed detection (paper length). When the  
button is pressed, the blinking moves from
(1) to (3). When the 

 button is pressed, the

blinking moves in the opposite direction.
(1) The “10” is blinking: Threshold is 10mm
(2) The “15” is blinking: Threshold is 15mm
(3) The “20” is blinking: Threshold is 20mm