Metrologic Instruments SP5500 Manuel D’Utilisation

 

8

 

The OptimusS Portable Data Terminal (PDT) requires minimal effort to begin functional operation for 
data collection in any application. In order to get started the unit must have a fresh battery inserted into 
the battery compartment. 

1.  Access the battery compartment by removing the battery cover (See Figure 7). To remove the 

cover, press the cover release down and slide the cover away form the unit. 

2.  Insert the Li-ion battery into the battery compartment, battery information side up and battery 

contacts to the bottom, at an angle with the battery contacts inserted first. 

3.  Push the Li-ion battery the remainder of the way into the compartment. The battery will fit 

snuggly into place. 

4.  Close the battery compartment by sliding the battery cover toward the scan head until the 

cover locks into place.  

 

 

5.  Turn the unit over, so the keypad is visible and hold down the power button  .   
6.  The LCD graphical display will display a menu and an audible indicator will sound to signify 

that the Optimus has been powered up properly. 

7.  Using the arrow keys select the Run Program option. 
8.  Scan a bar code. 

 
Note: The OptimusS comes with a default program loaded that allows users to scan items and enter 

their quantity.  For information on how to create these programs, please refer to the Optimizer 
manual. 

 

1 

2 

3 

Item  No. 

Description 

1 Li-ion 

battery 

2 Battery 

contacts 

3 Battery 

cover