Metrologic Instruments IS1650 Manuel D’Utilisation

 

 

21

S

CANNER 

O

PERATION

 

 

M

ODES OF 

O

PERATION

* 

 

1.  The IR detects an object in the IR activation range and the scanner’s 

light output automatically starts to flash as it attempts to scan the bar 
code. 

2.  The scanner continuously attempts to scan the bar code until either it 

succeeds or the bar code is removed from the scanner’s field of view. 

3.  When scanner successfully reads the bar code it will beep once, the 

white LED will flash and the decoded data will be transmitted to the 
host. 

The IS1650 can switch into different 
modes of operation using the 
MetroSet2 Software or Area Imaging 
Supplemental Guide (00-02281). 

 

1.  The IR detects an object in the IR 

activation range and automatically 
turns on linear illumination. 

2.  Aim the scanner’s line of light  

over the bar code. 

3.  Press the trigger to initiate scanning.  

The scanner’s light output will start to 
flash as it attempts to scan the 
bar code.   

   
If the trigger is released the 
scanner will stop trying to scan. 

 

 

4.  When scanner successfully reads the 

bar code it will beep once, the white 
LED will flash and the decoded data 
will be transmitted to the host.  

 

*  For additional configurable modes of operation, please refer to the Area 

Imaging Supplemental Configuration Guide (

MLPN

 00-02281).