Honeywell 3800gPDF Manuel D’Utilisation
7 - 5
Codabar Message Length
Scan the bar codes below to change the message length. Refer to
on page 7-2 for additional information. Minimum and Maximum
lengths = 2-60. Minimum Default = 4, Maximum Default = 60.
Code 39
< Default All Code 39 Settings >
Code 39
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters.
may either transmit, or not transmit Start/Stop characters.
Default = Don’t
Transmit.
Code 39 Check Character
No Check Character indicates that the imager reads and transmits bar code
data with or without a check character.
data with or without a check character.
When Check Character is set to Validate, but Don’t Transmit, the unit only
reads Code 39 bar codes printed with a check character, but will not transmit
the check character with the scanned data.
reads Code 39 bar codes printed with a check character, but will not transmit
the check character with the scanned data.
Minimum Message Length
Maximum Message Length
* On
Off
Transmit
* Don’t Transmit