Multi-Tech Systems FF130 Manuel D’Utilisation
Chapter 3: FaxFinder Web Management Interface
FaxFinder Administrator User Guide
27
Fax Status
Fax Status shows current state of modems as well as inbound and outbound faxes. Also, Administrators
can view and change the state of internal modems.
can view and change the state of internal modems.
Modem Status
Shows the current condition of each internal modem.
Field
Description
Modem
The sequential modem number associated with each internal modem based on the
FaxFinder model (1 for the FF130, 1-2 for the FF230, 1-4 for the FF430 and 1-8 for
the FF830).
FaxFinder model (1 for the FF130, 1-2 for the FF230, 1-4 for the FF430 and 1-8 for
the FF830).
State
The current modem state: Waiting for Ring, Connected, and Busied Out.
Page
The page that a modem is currently transmitting, if any.
Vertical
Resolution
Resolution
The resolution used to transmit the page. Vertical scan line types include fine and
standard.
standard.
Baud Rate
The modem’s current baud rate.
Width
The current width setting for faxes sent through the listed modem.
Length
The current length setting for faxes sent through the listed modem.
Connect Time
When the current connection was made.
Elapsed Time
The time that has passed since the current connection was made.
Remote ID
The identification received from the remote connection.
Phone Number When sending, this is the phone number that was dialed. When receiving, this is
the DID number detected.
Action
Administrator only.
Option
Description
Initialize
Click this link to send the initialization command to the modem. This
will remove a busy-out state from a modem. When initialization is
complete, “Modem x initialized” appears in color at the top of the
page. If you click this while a fax is in progress, it will interrupt the
fax and cause it to fail.
will remove a busy-out state from a modem. When initialization is
complete, “Modem x initialized” appears in color at the top of the
page. If you click this while a fax is in progress, it will interrupt the
fax and cause it to fail.
Busy
Click this link to set the modem to a busy state so that it cannot send
or receive faxes. Any incoming calls to this modem will receive the
busy tone. To allow the modem to send faxes, click the modem’s
Initialize link.
or receive faxes. Any incoming calls to this modem will receive the
busy tone. To allow the modem to send faxes, click the modem’s
Initialize link.