Nikon LS8000 Manuel D’Utilisation
51
Confirming Device Registration (Windows 98 SE)
After registering the scanner, confirm that the device is working normally as described below.
After registering the scanner, confirm that the device is working normally as described below.
1
Turn the scanner on
Make sure that the scanner is connected and turned on.
Make sure that the scanner is connected and turned on.
2
Open the System Properties dialog
From the Start menu, select Settings > Control Panel and double-click the System
icon.
From the Start menu, select Settings > Control Panel and double-click the System
icon.
3
Display the Device Manager
The System Properties dialog will be dis-
played. Open the Device Manager tab.
The System Properties dialog will be dis-
played. Open the Device Manager tab.
4
Confirm that the scanner is listed under “Imaging Device”
If “Imaging Device” appears in the De-
vice Manager, click the “+” to its left to
view the imaging devices currently regis-
tered with Windows. Confirm that your
scanner is listed.
If “Imaging Device” appears in the De-
vice Manager, click the “+” to its left to
view the imaging devices currently regis-
tered with Windows. Confirm that your
scanner is listed.
If the Scanner Is Not Listed
If your scanner is not listed under “Imag-
ing Device,” proceed to “Updating the
Device Driver (Windows 98 SE)” (
If your scanner is not listed under “Imag-
ing Device,” proceed to “Updating the
Device Driver (Windows 98 SE)” (
53).