Xerox xerox documate 3115 Manuel D’Utilisation

Xerox

®

 DocuMate

®

 3115

User’s Guide

182

Advanced Panel Options

The options in this panel may also appear in the 

 panel, but with additional settings for you to 

fine-tune the feature you've selected. Select the 

 source configuration mode to show this 

panel.

This option removes speckles from the background. Speckles are small spots on an image that the 
scanner interpreted as a valid part of the document. For example, an irregularity in the paper, a small 
wrinkle, or holes where a staple was removed may show up as speckles in the scanned image. The 

 option identifies these spots and removes them. This option is only available when scanning 

in black and white. 

—this is the size of the area that is evaluated for stray dots. 

—this is the maximum number of dots within the radius that should be considered a speckle. If 

this number of dots are in the circle, the dots will not be considered a speckle and remain in the image. 
If there are less than this number of dots in the circle, the dots are considered a speckle and removed 
from the image.

For example, if the radius is 3 and the number is 5, then the document is evaluated in sections of 3x3 
pixels and if there are more than 5 stray dots within a 3x3 area, they are not considered a speckle.

Use the 

 option to increase or decrease the sharpness in the scanned image. Click the drop down 

menu and select an option from the list. Use the 

 slider to adjust the tolerance level of the filter.