Xerox xerox documate 3115 Manuel D’Utilisation

Xerox

®

 DocuMate

®

 3115

User’s Guide

185

Scanner Configuration

The scanner configuration tab shows the hardware information for your scanner.

•

—input the number of minutes you want the scanner to wait before it turns itself off. 

Click the green enter button to save any changes in the power off field.

Click the red reset button to reset to the default timeout value.

•

—click this button to revert the scanner hardware back to the scanner’s firmware 

defaults. As this option resets the scanner hardware, you will not see a change in the interface 
unless the power save time has been changed. Clicking this button includes returning the power 
save time-out to the default setting.

•

—when selected, scanning will stop if the scanner 

detects that an item is being fed through at too great of an angle.

•

—when selected, front-fed pages will exit from the back of the 

scanner. When this option is not selected, front-fed paper will exit from the front of the scanner.

•

—click the 

 button to start the scanner calibration wizard. The scanner self-

calibrates when you click the Calibrate button. The calibration window on-screen will close 
automatically when calibration is finished. If it doesn’t close automatically, click the Finish button.

•

—click the reset button next to the counter you want to set back to 0.

You can use this option to monitor the number of scans completed since the last time a part has 
been replaced.