Canon DR-2510C Manuel D’Utilisation
Chapter 3 Appendix
- 28 -
3
6
Clean the
e
rollers by wiping the exposed part without turning them.
7
Wipe the document holding guide with a cloth that has been dampened
with water and thoroughly wrung out.
with water and thoroughly wrung out.
8
Remove the retard roller and feeding roller (See p. 29 and p. 31.).
IMPORTANT
Remove the retard roller and feeding roller from the scanner to clean them, and
make sure to reattach them to the scanner when cleaning is finished.
make sure to reattach them to the scanner when cleaning is finished.
9
Wipe the removed rollers with a cloth that has been dampened with water
and thoroughly wrung out.
and thoroughly wrung out.
10
Reattach the retard roller and feeding roller (See. p. 30 and p. 32.).
11
Close the front unit by gently pushing it up on both sides until it clicks into
place. Make sure that the front unit is completely closed by pushing until
you hear a click.
place. Make sure that the front unit is completely closed by pushing until
you hear a click.
12
Close the document feed tray.
e
Document
Holding Guide
Holding Guide