Canon CD-4070NW Manuel D’Utilisation
Chapter 4. Using the CD-4070NW
33
• The paper side guide is inscribed with a loading limit mark
(
). This mark indicates the total thickness of
approximately 100 sheets of plain paper for recording
(80 g/m
(80 g/m
2
). Do not place documents above this mark.
Otherwise, this may result in a paper jam.
6
Place the document face up, then adjust the paper side
guides to match the width of the document.
guides to match the width of the document.
7
Specify the recording name
→ press [Start].
For information on how to specify the recording name, see
“CD-R Document Recoder CD-4070NW Instructions
(Software Version).”
Recording starts.
“CD-R Document Recoder CD-4070NW Instructions
(Software Version).”
Recording starts.
NOTE
• If feeding stops while recording due to a system error or
paper jam, resolve the problem, confirm that the last
document page fed was correctly recorded, and then
continue recording.
document page fed was correctly recorded, and then
continue recording.
• Take care that documents with low paper thickness do not
fall from the document eject tray.
8
When no more document pages remain.
If you selected [Standard] Feeding:
If you selected [Standard] Feeding:
Recording ends when no more document pages remain, and
the document image is displayed.
the document image is displayed.
If you selected [Auto] Feeding:
Recording is suspended. Recording continues if a
document is loaded and detected. Automatic feeding can be
repeated until you press [Abort].
Recording is suspended. Recording continues if a
document is loaded and detected. Automatic feeding can be
repeated until you press [Abort].
LTR A4
B4