Epson 4990 Series Manuel D’Utilisation

Epson Perfection 4990 Series

10/04

Epson Perfection 4990 Series - 3

3. In EPSON Scan, choose Home or Professional mode. You 

see a screen similar to this:

4. Click the 

Preview

 button at the bottom of the screen. Your 

photo appears in the Preview window.

5. Click the   button to select the image area to be scanned. 

Adjust the marquee if necessary.

6. Select the 

Digital ICE

 or 

Color Restoration

 checkbox 

(in Professional Mode, scroll to the bottom of the screen):
❏ If your photo is dirty, scratched, creased, or torn, select 

Digital ICE

.

❏ If the colors in your photo are faded, select 

Color

 

Restoration

.

Note: 
You can select both settings, if necessary.

7. Click the Scan button.

Click the 

Close

 button. Your image now appears in Photoshop 

Elements.

Before scanning transparent documents, you need to remove 
the scanner’s reflective document mat; this exposes the scanner’s 
transparency unit (light source), which is built into the lid. 

If you’re scanning slides or film strips, you’ll also need to use 
one of the film holders.

Note: 
For instructions on scanning film and contact sheets, up to 8 × 
10 inches, see the on-screen Reference Guide.

1. Make sure the transparency unit cable is connected to the 

transparency unit connector on the back of the scanner. 
(If it is not connected, turn off the scanner, connect the 
transparency unit cable, then turn the scanner back on.)

2. Lift the scanner lid all the way up and pull the reflective 

document mat up and off of the scanner lid, as shown.

3. If you are scanning film or negatives, open the cover, then 

slide the film into the corresponding holder, with the film’s 
shiny base side facing down. (If you are scanning slides, go 
to step 6.)