Enterasys SecureStack C2G170-24 C2G170-24 Manuel D’Utilisation
Codes de produits
C2G170-24
There is nothing more important
than our customers.
Benefits
Minimal Operator Intervention
• Patented Secure Networks command
and control functions enable you to
apply up to 768 policy rules to create a
self-managed network
apply up to 768 policy rules to create a
self-managed network
• Auto-discovery of network attached
devices (LLDP/LLDP-MED) enable you
to create new policy, configuration,
location and management applications
to create new policy, configuration,
location and management applications
• NetSight management console makes
it easy to deploy policy changes in
large networks
large networks
Predictable Quality of Service
• Extensive controls for managing QoS
by Layer 2,3 and 4 traffic, bandwidth,
rate limits, user profile or application
rate limits, user profile or application
• High availability through Loop Protect,
redundant power supplies, automatic
link failover and closed loop stacking
link failover and closed loop stacking
Support and Service
• The Enterasys service and support
staff is an industry best with a 95%
customer satisfaction rating and an
average tenure of 10 years
customer satisfaction rating and an
average tenure of 10 years
daTaSheeT
SecureStack C2 Switch Family
Policy-based L2 switching with 10 gigabit uplinks and high availability stacking
Product Overview
The SecureStack C2 switch family delivers advanced switching and routing features previously
found only in large enterprise core switches. A single stack density is now increased to an
industry-leading 360 gigabit ports or 384 10/100 ports with 32 gigabit uplinks. Reliability
and availability is assured with support for Closed Loop Stacking, redundant core connections,
redundant power options, and redundant stack management. The extensive security features built
into all SecureStack C2 switches make them an important part of Enterasys Secure Networks, and
enable Secure Networks to be extended to the network edge.
found only in large enterprise core switches. A single stack density is now increased to an
industry-leading 360 gigabit ports or 384 10/100 ports with 32 gigabit uplinks. Reliability
and availability is assured with support for Closed Loop Stacking, redundant core connections,
redundant power options, and redundant stack management. The extensive security features built
into all SecureStack C2 switches make them an important part of Enterasys Secure Networks, and
enable Secure Networks to be extended to the network edge.
high-Performance and high-availability Stacking
SecureStack C2 switches incorporate integrated stacking ports that support up to 40 Gbps of
bi-directional bandwidth between any two adjacent switches for a total of 320 Gbps of stacking
bandwidth. No additional stack module is required to stack the switches. Each switch has a 160
Gbps switch fabric with half of the bandwidth (80 Gbps) dedicated to stacking. In an eight-
switch stack, 640 Gbps of switching bandwidth is dedicated to stacking. A single stack can
comprise any combination of SecureStack C2 switches allowing a mixture of high-density 10/100,
10/100/1000, and/or Power-over-Ethernet ports to be linked to the network core via copper,
multimode fiber, and/or single-mode fiber Gigabit, as well as 10-Gigabit fiber uplinks. Closed
Loop Stacking is implemented, which assures that a single switch or cable connection failure in
the stack will not impact the overall stack operation. The SecureStack C2 stack auto-configures,
allowing stack switch units to be added or removed with minimal packet interruption. Up to eight
SecureStack C2 switches can be supported in a stack with a single IP address for complete stack
management. Redundant stack management is supported by assigning a primary and secondary
stack manager to separate switches in the stack.
bi-directional bandwidth between any two adjacent switches for a total of 320 Gbps of stacking
bandwidth. No additional stack module is required to stack the switches. Each switch has a 160
Gbps switch fabric with half of the bandwidth (80 Gbps) dedicated to stacking. In an eight-
switch stack, 640 Gbps of switching bandwidth is dedicated to stacking. A single stack can
comprise any combination of SecureStack C2 switches allowing a mixture of high-density 10/100,
10/100/1000, and/or Power-over-Ethernet ports to be linked to the network core via copper,
multimode fiber, and/or single-mode fiber Gigabit, as well as 10-Gigabit fiber uplinks. Closed
Loop Stacking is implemented, which assures that a single switch or cable connection failure in
the stack will not impact the overall stack operation. The SecureStack C2 stack auto-configures,
allowing stack switch units to be added or removed with minimal packet interruption. Up to eight
SecureStack C2 switches can be supported in a stack with a single IP address for complete stack
management. Redundant stack management is supported by assigning a primary and secondary
stack manager to separate switches in the stack.
High-density, high-availability stackable
10/100 or 10/100/1000 switching
Delivers Secure Networks
10/100 or 10/100/1000 switching
Delivers Secure Networks
™
to the
stackable edge
Multilayer switching and full Layer 3 routing
Extensive QoS support for VoIP and
real-time broadcast/multicast video
Power over Ethernet and 10 Gigabit uplink
models
Lifetime warranty
Multilayer switching and full Layer 3 routing
Extensive QoS support for VoIP and
real-time broadcast/multicast video
Power over Ethernet and 10 Gigabit uplink
models
Lifetime warranty